Whether you need to replace your worn out fender flare molding or you're replacing your fender flares, this TrimGard fender flare molding fits between the fender flare and your fender to protect the painted surface. The unique shape of this Black Fender Flare Trim Molding features a peel-n-stick adhesive strip on the back which holds tight to your fender flares and is flexible enough to fit most any fender flare. This TrimGard Fender Flare Molding is manufactured from a durable mylar polymer that bounces back after impact and features a color-through design to ensure that the molding color remains true even if the outer surface gets scratched. To be sure that you get just what you need, we offer our Fender Flare Moulding available here in one foot increments, so an order quantity 1 will get you a one foot section (2 = a two foot continuous roll, 3 = a three foot continuous roll, etc.). Each section of these Fender Flare Moldings feature a unique tapered shape with an outside width of 9/32" and that is all that will be seen once the molding and flare is installed. This easy-to-install Trim-Gard Fender Flare Trim helps prevent damage to your paint from fender flare rub. TrimGard Fender Flare Molding can take the abuse ! 9/32"
Trim-Gard Brand
Application~Peel-n-StickAttachment~Adhesive TapeBacking~3M Adhesive TapeColor~BlackLength~Cut to lengthMaterial~PVC (Flexible)Quantity~Sold by the FootThickness~7/32"Type~FlexibleUniversal Fit~YesWidth~9/32"
Free Sample: This material is manufactured in large batch quantities and the dimensions can vary slightly (1/16") from batch to batch. If you would like a free 2" sample of this molding (U.S. addresses only), please click here to send us a sample request and we will get one sent to you via USPS First Class mail (limit one free sample order per customer). If you need additional samples, please order 1 foot sections of those items.
Sold and priced by the foot;
Order quantity of 1 = a 1 foot continuous roll
Order quantity of 2 = a 2 foot continuous roll
Order quantity of 3 = a 3 foot continuous roll
And so on, up to a full roll of 20 feet.
Standard roll length is 20 feet, so if you order any length over 20 feet, you will receive a 20 foot roll(s) plus the additional length needed to complete your order.
Not the color you want? Click here to see our entire line of Black Molding.
Trim-Gard Brand
- Application
- Peel-n-Stick
- Attachment
- Adhesive Tape
- Backing
- 3M Adhesive Tape
- Color
- Black
- Length
- Cut to length
- Material
- PVC (Flexible)
- Quantity
- Sold by the Foot
- Thickness
- 7/32"
- Type
- Flexible
- Universal Fit
- Yes
- Width
- 9/32"
