This Gorilla Angled Valve Stem features an Angle Style and an inner mount design where the retention nut is located inside the wheel. Gorilla manufactures this angled valve stem using the highest quality materials and strictest manufacturing standards. They are sold here individually so that you can get just what you need to keep your tires inflated properly and in safe working order. This Tire Valve Stem also includes a domed style chrome valve stem cap. Angle Style, Gorilla Brand
Attachment~Bolt-onColor~ChromeEnd Type~Angled w/Hex CapFinish~Chrome Plated (High luster)Fitment~Fits hole size 0.45" (29/64", 11.4mm)Head~Hex Cap (Domed)Height~1.6" (1-19/32", 40.5mm)(Visible Outside Wheel w/cap)Length~2.2" (2-13/64", 5.59cm)Material~Hardened SteelMount~Inner Mount (nuts on back)Outside Diameter~0.65" (41/64", 16.3mm)(at widest point)Quantity~Sold IndividuallyShank Diameter~0.45" (29/64", 11.43mm)(at rubber washers)Style~Long Angle w/Chrome CapThread Length~0.3" (19/64", 7.62mm)(at cap)Includes~(1) Stem, (1) Inner rubber seal, (1) Outer rubber seal, (1) Inner steel washer, (2) Inner mounting nuts, (1) Valve stem capMounting Nuts~12mm HexHex Cap Dimensions~0.38" (3/8", 9.65mm) x 0.50" (1/2", 12.7mm)(Height) w/Dome Top
To reduce your cost, Brandsport offers this item in Bulk (sold here individually). Gorilla also lists this same item in a 4-piece set as Display Package # VS403C.
- Attachment
- Bolt-on
- Color
- Chrome
- End Type
- Angled w/Hex Cap
- Finish
- Chrome Plated (High luster)
- Fitment
- Fits hole size 0.45" (29/64", 11.4mm)
- Head
- Hex Cap (Domed)
- Height
- 1.6" (1-19/32", 40.5mm)(Visible Outside Wheel w/cap)
- Length
- 2.2" (2-13/64", 5.59cm)
- Material
- Hardened Steel
- Mount
- Inner Mount (nuts on back)
- Outside Diameter
- 0.65" (41/64", 16.3mm)(at widest point)
- Quantity
- Sold Individually
- Shank Diameter
- 0.45" (29/64", 11.43mm)(at rubber washers)
- Style
- Long Angle w/Chrome Cap
- Thread Length
- 0.3" (19/64", 7.62mm)(at cap)
- Includes
- (1) Stem, (1) Inner rubber seal, (1) Outer rubber seal, (1) Inner steel washer, (2) Inner mounting nuts, (1) Valve stem cap
- Mounting Nuts
- 12mm Hex
- Hex Cap Dimensions
- 0.38" (3/8", 9.65mm) x 0.50" (1/2", 12.7mm)(Height) w/Dome Top
