Stripped bolts and nuts tightened past spec can be pretty annoying- especially if you make those mistakes yourself. So take a preventative measure and do your tightening with the Gorilla torque wrench. With a 1/ 2 inch drive and 1/ 2 inch by 3/8 inch adapter you can use this adjustable torque wrench with quite a few of your SAE sockets. To reach some of those harder to reach spots a 5-inch extension bar is included as well. The Gorilla torque wrench measures up to 150 ft/lbs. of torque- plenty to keep you out of trouble. The wrench itself features hardened steel construction with a nice chrome finish. Like all Gorilla tools and accessories, these torque wrenches are made to last with focus on precision to ensure an accurate reading. To help keep the readings accurate and to protect the wrench, each comes with a high-impact, black plastic carrying case. Whether you?re tightening down a set of lug nuts on a sweet set of wheels, rebuilding your suspension or even screwing on a drain plug onto a crush type gasket give yourself the peace of mind of a job well-done with the Gorilla torque wrench. Gorilla Brand
Capacity~20-150 ft/lbs. (2.8-20.7 Kgm)Color~ChromeContainer~Thermoform Plastic (Dual Clasp)Drive~1/2"||3/8"End Type~1/2" SquareFinish~Chrome Plated (High luster)Head~SquareLength~18.25" (18-1/4", 46.35cm)Material~Hardened SteelOutside Diameter~1.1" (1-3/32", 27.9mm)(at Handle)Quantity~Sold IndividuallyShank Diameter~0.90" (29/32", 22.86mm)Thickness~0.65" (21/32", 16.5mm)(at Head)Type~Click AdjustableWidth~1.8" (1-51/64", 4.57cm)(at Head)Instructions~IncludedIncludes~One Torque Wrench, One 5" Extension, One 1/2" to 3/8" adapter, Plastic Carrying Case, Printed Instruction SheetNote~Features a 1-1/8" Hex Head nut at handle tipNote~Micro-Meter Click Adjustable from 20 to 150 ft/lbs., w/Thumb Screw Dial Lock
- Capacity
- 20-150 ft/lbs. (2.8-20.7 Kgm)
- Color
- Chrome
- Container
- Thermoform Plastic (Dual Clasp)
- Drive
- 1/2"||3/8"
- End Type
- 1/2" Square
- Finish
- Chrome Plated (High luster)
- Head
- Square
- Length
- 18.25" (18-1/4", 46.35cm)
- Material
- Hardened Steel
- Outside Diameter
- 1.1" (1-3/32", 27.9mm)(at Handle)
- Quantity
- Sold Individually
- Shank Diameter
- 0.90" (29/32", 22.86mm)
- Thickness
- 0.65" (21/32", 16.5mm)(at Head)
- Type
- Click Adjustable
- Width
- 1.8" (1-51/64", 4.57cm)(at Head)
- Instructions
- Included
- Includes
- One Torque Wrench, One 5" Extension, One 1/2" to 3/8" adapter, Plastic Carrying Case, Printed Instruction Sheet
- Note
- Micro-Meter Click Adjustable from 20 to 150 ft/lbs., w/Thumb Screw Dial Lock
